| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: fix null-pointer dereference on local read error
In drbd_request_endio(), READ_COMPLETED_WITH_ERROR is passed to
__req_mod() with a NULL peer_device:
__req_mod(req, what, NULL, &m);
The READ_COMPLETED_WITH_ERROR handler then unconditionally passes this
NULL peer_device to drbd_set_out_of_sync(), which dereferences it,
causing a null-pointer dereference.
Fix this by obtaining the peer_device via first_peer_device(device),
matching how drbd_req_destroy() handles the same situation. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not free data reservation in fallback from inline due to -ENOSPC
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0). |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_gate: snapshot parameters with RCU on replace
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: Fix a hmm_range_fault() livelock / starvation problem
If hmm_range_fault() fails a folio_trylock() in do_swap_page,
trying to acquire the lock of a device-private folio for migration,
to ram, the function will spin until it succeeds grabbing the lock.
However, if the process holding the lock is depending on a work
item to be completed, which is scheduled on the same CPU as the
spinning hmm_range_fault(), that work item might be starved and
we end up in a livelock / starvation situation which is never
resolved.
This can happen, for example if the process holding the
device-private folio lock is stuck in
migrate_device_unmap()->lru_add_drain_all()
sinc lru_add_drain_all() requires a short work-item
to be run on all online cpus to complete.
A prerequisite for this to happen is:
a) Both zone device and system memory folios are considered in
migrate_device_unmap(), so that there is a reason to call
lru_add_drain_all() for a system memory folio while a
folio lock is held on a zone device folio.
b) The zone device folio has an initial mapcount > 1 which causes
at least one migration PTE entry insertion to be deferred to
try_to_migrate(), which can happen after the call to
lru_add_drain_all().
c) No or voluntary only preemption.
This all seems pretty unlikely to happen, but indeed is hit by
the "xe_exec_system_allocator" igt test.
Resolve this by waiting for the folio to be unlocked if the
folio_trylock() fails in do_swap_page().
Rename migration_entry_wait_on_locked() to
softleaf_entry_wait_unlock() and update its documentation to
indicate the new use-case.
Future code improvements might consider moving
the lru_add_drain_all() call in migrate_device_unmap() to be
called *after* all pages have migration entries inserted.
That would eliminate also b) above.
v2:
- Instead of a cond_resched() in hmm_range_fault(),
eliminate the problem by waiting for the folio to be unlocked
in do_swap_page() (Alistair Popple, Andrew Morton)
v3:
- Add a stub migration_entry_wait_on_locked() for the
!CONFIG_MIGRATION case. (Kernel Test Robot)
v4:
- Rename migrate_entry_wait_on_locked() to
softleaf_entry_wait_on_locked() and update docs (Alistair Popple)
v5:
- Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION
version of softleaf_entry_wait_on_locked().
- Modify wording around function names in the commit message
(Andrew Morton)
(cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
| NVIDIA BioNemo for Linux contains a vulnerability where a user could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| NVIDIA BioNeMo Core for Linux contains a vulnerability where a user could cause a path traversal by loading a malicious file. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in wait ioctl
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
(cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in signal ioctl
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
[ rjw: Added one paragraph to the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
kthread: consolidate kthread exit paths to prevent use-after-free
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for ns iteration ioctls
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
