| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: stratix10-rsu: Fix NULL pointer dereference when RSU is disabled
When the Remote System Update (RSU) isn't enabled in the First Stage
Boot Loader (FSBL), the driver encounters a NULL pointer dereference when
excute svc_normal_to_secure_thread() thread, resulting in a kernel panic:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
...
Data abort info:
...
[0000000000000008] user address but active_mm is swapper
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 79 Comm: svc_smc_hvc_thr Not tainted 6.19.0-rc8-yocto-standard+ #59 PREEMPT
Hardware name: SoCFPGA Stratix 10 SoCDK (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : svc_normal_to_secure_thread+0x38c/0x990
lr : svc_normal_to_secure_thread+0x144/0x990
...
Call trace:
svc_normal_to_secure_thread+0x38c/0x990 (P)
kthread+0x150/0x210
ret_from_fork+0x10/0x20
Code: 97cfc113 f9400260 aa1403e1 f9400400 (f9400402)
---[ end trace 0000000000000000 ]---
The issue occurs because rsu_send_async_msg() fails when RSU is not enabled
in firmware, causing the channel to be freed via stratix10_svc_free_channel().
However, the probe function continues execution and registers
svc_normal_to_secure_thread(), which subsequently attempts to access the
already-freed channel, triggering the NULL pointer dereference.
Fix this by properly cleaning up the async client and returning early on
failure, preventing the thread from being used with an invalid channel. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in wait ioctl
Huge input values in amdgpu_userq_wait_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
v2: squash in Srini's fix
(cherry picked from commit fcec012c664247531aed3e662f4280ff804d1476) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl
Drop reference to syncobj and timeline fence when aborting the ioctl due
output array being too small.
(cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add upper bound check on user inputs in signal ioctl
Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and
could be exploited.
So check these input value against AMDGPU_USERQ_MAX_HANDLES
which is big enough value for genuine use cases and could
potentially avoid OOM.
(cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request()
The update_cpu_qos_request() function attempts to initialize the 'freq'
variable by dereferencing 'cpudata' before verifying if the 'policy'
is valid.
This issue occurs on systems booted with the "nosmt" parameter, where
all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result,
any call to update_qos_requests() will result in a NULL pointer
dereference as the code will attempt to access pstate.turbo_freq using
the NULL cpudata pointer.
Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap()
after initializing the 'freq' variable, so it is better to defer the
'freq' until intel_pstate_get_hwp_cap() has been called.
Fix this by deferring the 'freq' assignment until after the policy and
driver_data have been validated.
[ rjw: Added one paragraph to the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
kthread: consolidate kthread exit paths to prevent use-after-free
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for ns iteration ioctls
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: prevent potential out-of-bounds reads in process_message_header()
If the message frame is (maliciously) corrupted in a way that the
length of the control segment ends up being less than the size of the
message header or a different frame is made to look like a message
frame, out-of-bounds reads may ensue in process_message_header().
Perform an explicit bounds check before decoding the message header. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ] |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: add a bunch of missing ceph_path_info initializers
ceph_mdsc_build_path() must be called with a zero-initialized
ceph_path_info parameter, or else the following
ceph_mdsc_free_path_info() may crash.
Example crash (on Linux 6.18.12):
virt_to_cache: Object is not a Slab page!
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400
[...]
Call Trace:
[...]
ceph_open+0x13d/0x3e0
do_dentry_open+0x134/0x480
vfs_open+0x2a/0xe0
path_openat+0x9a3/0x1160
[...]
cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info
WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400
[...]
kernel BUG at mm/slub.c:634!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
RIP: 0010:__slab_free+0x1a4/0x350
Some of the ceph_mdsc_build_path() callers had initializers, but
others had not, even though they were all added by commit 15f519e9f883
("ceph: fix race condition validating r_parent before applying state").
The ones without initializer are suspectible to random crashes. (I can
imagine it could even be possible to exploit this bug to elevate
privileges.)
Unfortunately, these Ceph functions are undocumented and its semantics
can only be derived from the code. I see that ceph_mdsc_build_path()
initializes the structure only on success, but not on error.
Calling ceph_mdsc_free_path_info() after a failed
ceph_mdsc_build_path() call does not even make sense, but that's what
all callers do, and for it to be safe, the structure must be
zero-initialized. The least intrusive approach to fix this is
therefore to add initializers everywhere. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: avoid crash when rmmod/insmod after ftrace killed
After we hit ftrace is killed by some errors, the kernel crash if
we remove modules in which kprobe probes.
BUG: unable to handle page fault for address: fffffbfff805000d
PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
RIP: 0010:kprobes_module_callback+0x89/0x790
RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02
RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX: ffffffff86a8de90
RDX: ffffed1025c2af9b RSI: 0000000000000008 RDI: ffffffffc0280068
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed1025c2af9a
R10: ffff88812e157cd7 R11: 205d323130325420 R12: 0000000000000002
R13: ffffffffc0290488 R14: 0000000000000002 R15: ffffffffc0280040
FS: 00007fbc450dd740(0000) GS:ffff888420331000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff805000d CR3: 000000010f624000 CR4: 00000000000006f0
Call Trace:
<TASK>
notifier_call_chain+0xc6/0x280
blocking_notifier_call_chain+0x60/0x90
__do_sys_delete_module.constprop.0+0x32a/0x4e0
do_syscall_64+0x5d/0xfa0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is because the kprobe on ftrace does not correctly handles
the kprobe_ftrace_disabled flag set by ftrace_kill().
To prevent this error, check kprobe_ftrace_disabled in
__disarm_kprobe_ftrace() and skip all ftrace related operations. |
| ArcGIS Server contains an improper authentication vulnerability in an undocumented administrative endpoint. An unauthenticated attacker could exploit this issue by sending a crafted request to the endpoint. Successful exploitation may result in disruption of the web-based browsing interface. This issue affects ArcGIS Server 12.0 and earlier. |
| ArcGIS Server contains an input validation weakness in the login redirection workflow. An Authenticated attacker could exploit this issue by sending a specially crafted request, Successful exploitation may result in the application redirecting the browser to an unintended, untrusted site, resulting in a limited confidentiality impact under specific user interaction conditions.
The vulnerability affects only the client side navigation logic during authentication and remains confined to the same security boundary. No server side compromise or cross component impact is possible. This issue affects ArcGIS Server 11.5. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix refcount bug and potential UAF in perf_mmap
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer. |
