| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Due to an uncontrolled resource consumption (Denial of Service) vulnerability, an authenticated attacker with regular user privileges and network access can repeatedly invoke a remote-enabled function module with an excessively large loop-control parameter. This triggers prolonged loop execution that consumes excessive system resources, potentially rendering the system unavailable. Successful exploitation results in a denial-of-service condition that impacts availability, while confidentiality and integrity remain unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: Fix infinite loop from zero-length messages
If a broken ucan device gets a message with the message length field set
to 0, then the driver will loop for forever in
ucan_read_bulk_callback(), hanging the system. If the length is 0, just
skip the message and go on to the next one.
This has been fixed in the kvaser_usb driver in the past in commit
0c73772cd2b8 ("can: kvaser_usb: leaf: Fix potential infinite loop in
command parsers"), so there must be some broken devices out there like
this somewhere. |
| Due to an uncontrolled resource consumption (Denial of Service) vulnerability, an authenticated attacker with regular user privileges and network access can repeatedly invoke a remote-enabled function module with an excessively large loop-control parameter. This triggers prolonged loop execution that consumes excessive system resources, potentially rendering the system unavailable. Successful exploitation results in a denial-of-service condition that impacts availability, while confidentiality and integrity remain unaffected. |
| An Unchecked Loop Condition in ASPECT provides an attacker the ability to maliciously consume system resources if session administrator credentials become compromised
This issue affects ASPECT-Enterprise: through 3.08.03; NEXUS Series: through 3.08.03; MATRIX Series: through 3.08.03. |
| Relative Path Traversal vulnerabilities in ASPECT allow access to file resources if session administrator credentials become compromised.
This issue affects ASPECT-Enterprise: through 3.08.03; NEXUS Series: through 3.08.03; MATRIX Series: through 3.08.03. |
| SAP Business Planning and Consolidation allows an authenticated standard user to call a function module by crafting specific parameters that causes a loop, consuming excessive resources and resulting in system unavailability. This leads to high impact on the availability of the application, there is no impact on confidentiality or integrity. |
| Issue summary: Checking excessively long DSA keys or parameters may be very
slow.
Impact summary: Applications that use the functions EVP_PKEY_param_check()
or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may
experience long delays. Where the key or parameters that are being checked
have been obtained from an untrusted source this may lead to a Denial of
Service.
The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform
various checks on DSA parameters. Some of those computations take a long time
if the modulus (`p` parameter) is too large.
Trying to use a very large modulus is slow and OpenSSL will not allow using
public keys with a modulus which is over 10,000 bits in length for signature
verification. However the key and parameter check functions do not limit
the modulus size when performing the checks.
An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check()
and supplies a key or parameters obtained from an untrusted source could be
vulnerable to a Denial of Service attack.
These functions are not called by OpenSSL itself on untrusted DSA keys so
only applications that directly call these functions may be vulnerable.
Also vulnerable are the OpenSSL pkey and pkeyparam command line applications
when using the `-check` option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. |
| Forge (also called `node-forge`) is a native implementation of Transport Layer Security in JavaScript. Prior to version 1.4.0, a Denial of Service (DoS) vulnerability exists in the node-forge library due to an infinite loop in the BigInteger.modInverse() function (inherited from the bundled jsbn library). When modInverse() is called with a zero value as input, the internal Extended Euclidean Algorithm enters an unreachable exit condition, causing the process to hang indefinitely and consume 100% CPU. Version 1.4.0 patches the issue. |
| `yaml` is a YAML parser and serialiser for JavaScript. Parsing a YAML document with a version of `yaml` on the 1.x branch prior to 1.10.3 or on the 2.x branch prior to 2.8.3 may throw a RangeError due to a stack overflow. The node resolution/composition phase uses recursive function calls without a depth bound. An attacker who can supply YAML for parsing can trigger a `RangeError: Maximum call stack size exceeded` with a small payload (~2–10 KB). The `RangeError` is not a `YAMLParseError`, so applications that only catch YAML-specific errors will encounter an unexpected exception type. Depending on the host application's exception handling, this can fail requests or terminate the Node.js process. Flow sequences allow deep nesting with minimal bytes (2 bytes per level: one `[` and one `]`). On the default Node.js stack, approximately 1,000–5,000 levels of nesting (2–10 KB input) exhaust the call stack. The exact threshold is environment-dependent (Node.js version, stack size, call stack depth at invocation). Note: the library's `Parser` (CST phase) uses a stack-based iterative approach and is not affected. Only the compose/resolve phase uses actual call-stack recursion. All three public parsing APIs are affected: `YAML.parse()`, `YAML.parseDocument()`, and `YAML.parseAllDocuments()`. Versions 1.10.3 and 2.8.3 contain a patch. |
| pypdf is a free and open-source pure-python PDF library. Versions prior to 6.9.2 have a vulnerability in which an attacker can craft a PDF which leads to an infinite loop. This requires reading a file in non-strict mode. This has been fixed in pypdf 6.9.2. If users cannot upgrade yet, consider applying the changes from the patch manually. |
| Liquid Studio 2.17 contains a denial of service vulnerability that allows local attackers to crash the application by providing malformed input through the keyboard interface. Attackers can trigger the vulnerability by entering arbitrary characters during application runtime, causing the application to become unresponsive or terminate abnormally. |
| Binutils objdump contains a denial-of-service vulnerability when processing a crafted binary with malformed DWARF debug_rnglists data. A logic error in the handling of the debug_rnglists header can cause objdump to repeatedly print the same warning message and fail to terminate, resulting in an unbounded logging loop until the process is interrupted. The issue was observed in binutils 2.44. A local attacker can exploit this vulnerability by supplying a malicious input file, leading to excessive CPU and I/O usage and preventing completion of the objdump analysis. |
| An issue was discovered in Binutils before 2.46. The objdump contains a denial-of-service vulnerability when processing a crafted binary with malformed debug information. A logic flaw in the handling of DWARF location list headers can cause objdump to enter an unbounded loop and produce endless output until manually interrupted. This issue affects versions prior to the upstream fix and allows a local attacker to cause excessive resource consumption by supplying a malicious input file. |
| Plesk Obsidian versions 8.0.1 through 18.0.73 are vulnerable to a Denial of Service (DoS) condition. The vulnerability exists in the get_password.php endpoint, where a crafted request containing a malicious payload can cause the affected web interface to continuously reload, rendering the service unavailable to legitimate users. An attacker can exploit this issue remotely without authentication, resulting in a persistent availability impact on the affected Plesk Obsidian instance. |
| Unchecked input for loop condition vulnerability in XML-RPC in Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to perform a denial-of-service (DoS) attacks via a crafted XML-RPC request. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix soft lockup during bt pages loop
Driver runs a for-loop when allocating bt pages and mapping them with
buffer pages. When a large buffer (e.g. MR over 100GB) is being allocated,
it may require a considerable loop count. This will lead to soft lockup:
watchdog: BUG: soft lockup - CPU#27 stuck for 22s!
...
Call trace:
hem_list_alloc_mid_bt+0x124/0x394 [hns_roce_hw_v2]
hns_roce_hem_list_request+0xf8/0x160 [hns_roce_hw_v2]
hns_roce_mtr_create+0x2e4/0x360 [hns_roce_hw_v2]
alloc_mr_pbl+0xd4/0x17c [hns_roce_hw_v2]
hns_roce_reg_user_mr+0xf8/0x190 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x118/0x290
watchdog: BUG: soft lockup - CPU#35 stuck for 23s!
...
Call trace:
hns_roce_hem_list_find_mtt+0x7c/0xb0 [hns_roce_hw_v2]
mtr_map_bufs+0xc4/0x204 [hns_roce_hw_v2]
hns_roce_mtr_create+0x31c/0x3c4 [hns_roce_hw_v2]
alloc_mr_pbl+0xb0/0x160 [hns_roce_hw_v2]
hns_roce_reg_user_mr+0x108/0x1c0 [hns_roce_hw_v2]
ib_uverbs_reg_mr+0x120/0x2bc
Add a cond_resched() to fix soft lockup during these loops. In order not
to affect the allocation performance of normal-size buffer, set the loop
count of a 100GB MR as the threshold to call cond_resched(). |
| .NET and Visual Studio Denial of Service Vulnerability |
| An Unchecked Input for Loop Condition in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to cause IO devices that use the library to enter an infinite loop by sending a malicious RPC packet. |
| Issue summary: Checking excessively long DH keys or parameters may be very slow.
Impact summary: Applications that use the functions DH_check(), DH_check_ex()
or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long
delays. Where the key or parameters that are being checked have been obtained
from an untrusted source this may lead to a Denial of Service.
The function DH_check() performs various checks on DH parameters. After fixing
CVE-2023-3446 it was discovered that a large q parameter value can also trigger
an overly long computation during some of these checks. A correct q value,
if present, cannot be larger than the modulus p parameter, thus it is
unnecessary to perform these checks if q is larger than p.
An application that calls DH_check() and supplies a key or parameters obtained
from an untrusted source could be vulnerable to a Denial of Service attack.
The function DH_check() is itself called by a number of other OpenSSL functions.
An application calling any of those other functions may similarly be affected.
The other functions affected by this are DH_check_ex() and
EVP_PKEY_param_check().
Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications
when using the "-check" option.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
