Export limit exceeded: 353397 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353397 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-45913 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socke ---truncated--- | ||||
| CVE-2026-45912 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split. | ||||
| CVE-2026-45911 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-45910 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | ||||
| CVE-2026-45909 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations. | ||||
| CVE-2026-45908 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. | ||||
| CVE-2026-45907 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary. | ||||
| CVE-2026-45906 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: pf1550: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45905 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path icmp_route_lookup() performs multiple route lookups to find a suitable route for sending ICMP error messages, with special handling for XFRM (IPsec) policies. The lookup sequence is: 1. First, lookup output route for ICMP reply (dst = original src) 2. Pass through xfrm_lookup() for policy check 3. If blocked (-EPERM) or dst is not local, enter "reverse path" 4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec which reverses the original packet's flow (saddr<->daddr swapped) 5. If fl4_dec.saddr is local (we are the original destination), use __ip_route_output_key() for output route lookup 6. If fl4_dec.saddr is NOT local (we are a forwarding node), use ip_route_input() to simulate the reverse packet's input path 7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr (original packet's source) as destination. If this address becomes local between the initial check and ip_route_input() call (e.g., due to concurrent "ip addr add"), ip_route_input() returns a LOCAL route with dst.output set to ip_rt_bug. This route is then used for ICMP output, causing dst_output() to call ip_rt_bug(), triggering a WARN_ON: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1 Call Trace: <TASK> ip_push_pending_frames+0x202/0x240 icmp_push_reply+0x30d/0x430 __icmp_send+0x1149/0x24f0 ip_options_compile+0xa2/0xd0 ip_rcv_finish_core+0x829/0x1950 ip_rcv+0x2d7/0x420 __netif_receive_skb_one_core+0x185/0x1f0 netif_receive_skb+0x90/0x450 tun_get_user+0x3413/0x3fb0 tun_chr_write_iter+0xe4/0x220 ... Fix this by checking rt2->rt_type after ip_route_input(). If it's RTN_LOCAL, the route cannot be used for output, so treat it as an error. The reproducer requires kernel modification to widen the race window, making it unsuitable as a selftest. It is available at: https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81 | ||||
| CVE-2026-45904 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling The recent commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") restructured the EEH driver to improve synchronization with the PCI hotplug layer. However, it inadvertently moved pci_lock_rescan_remove() outside its intended scope in eeh_handle_normal_event(), leading to broken PCI error reporting and improper EEH event triggering. Specifically, eeh_handle_normal_event() acquired pci_lock_rescan_remove() before calling eeh_pe_bus_get(), but eeh_pe_bus_get() itself attempts to acquire the same lock internally, causing nested locking and disrupting normal EEH event handling paths. This patch adds a boolean parameter do_lock to _eeh_pe_bus_get(), with two public wrappers: eeh_pe_bus_get() with locking enabled. eeh_pe_bus_get_nolock() that skips locking. Callers that already hold pci_lock_rescan_remove() now use eeh_pe_bus_get_nolock() to avoid recursive lock acquisition. Additionally, pci_lock_rescan_remove() calls are restored to the correct position—after eeh_pe_bus_get() and immediately before iterating affected PEs and devices. This ensures EEH-triggered PCI removes occur under proper bus rescan locking without recursive lock contention. The eeh_pe_loc_get() function has been split into two functions: eeh_pe_loc_get(struct eeh_pe *pe) which retrieves the loc for given PE. eeh_pe_loc_get_bus(struct pci_bus *bus) which retrieves the location code for given bus. This resolves lockdep warnings such as: <snip> [ 84.964298] [ T928] ============================================ [ 84.964304] [ T928] WARNING: possible recursive locking detected [ 84.964311] [ T928] 6.18.0-rc3 #51 Not tainted [ 84.964315] [ T928] -------------------------------------------- [ 84.964320] [ T928] eehd/928 is trying to acquire lock: [ 84.964324] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964342] [ T928] but task is already holding lock: [ 84.964347] [ T928] c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964357] [ T928] other info that might help us debug this: [ 84.964363] [ T928] Possible unsafe locking scenario: [ 84.964367] [ T928] CPU0 [ 84.964370] [ T928] ---- [ 84.964373] [ T928] lock(pci_rescan_remove_lock); [ 84.964378] [ T928] lock(pci_rescan_remove_lock); [ 84.964383] [ T928] *** DEADLOCK *** [ 84.964388] [ T928] May be due to missing lock nesting notation [ 84.964393] [ T928] 1 lock held by eehd/928: [ 84.964397] [ T928] #0: c000000003b29d58 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_lock_rescan_remove+0x28/0x40 [ 84.964408] [ T928] stack backtrace: [ 84.964414] [ T928] CPU: 2 UID: 0 PID: 928 Comm: eehd Not tainted 6.18.0-rc3 #51 VOLUNTARY [ 84.964417] [ T928] Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_022) hv:phyp pSeries [ 84.964419] [ T928] Call Trace: [ 84.964420] [ T928] [c0000011a7157990] [c000000001705de4] dump_stack_lvl+0xc8/0x130 (unreliable) [ 84.964424] [ T928] [c0000011a71579d0] [c0000000002f66e0] print_deadlock_bug+0x430/0x440 [ 84.964428] [ T928] [c0000011a7157a70] [c0000000002fd0c0] __lock_acquire+0x1530/0x2d80 [ 84.964431] [ T928] [c0000011a7157ba0] [c0000000002fea54] lock_acquire+0x144/0x410 [ 84.964433] [ T928] [c0000011a7157cb0] [c0000011a7157cb0] __mutex_lock+0xf4/0x1050 [ 84.964436] [ T928] [c0000011a7157e00] [c000000000de21d8] pci_lock_rescan_remove+0x28/0x40 [ 84.964439] [ T928] [c0000011a7157e20] [c00000000004ed98] eeh_pe_bus_get+0x48/0xc0 [ 84.964442] [ T928] [c0000011a7157e50] [c00000 ---truncated--- | ||||
| CVE-2026-45903 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flags. | ||||
| CVE-2026-45902 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq256xx: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle. | ||||
| CVE-2026-45901 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this. | ||||
| CVE-2026-45900 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix netdev memory leak in dpaa2_caam_probe When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in dpaa2") converted embedded net_device to dynamically allocated pointers, it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in dpaa2_dpseci_free() for error paths. This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe due to DPIO devices not being ready yet. The kernel's deferred probe mechanism handles the retry successfully, but the netdevs allocated during the failed probe attempt are never freed, resulting in kmemleak reports showing multiple leaked netdev-related allocations all traced back to dpaa2_caam_probe(). Fix this by preserving the CPU mask of allocated netdevs during setup and using it for cleanup in dpaa2_dpseci_free(). This approach ensures that only the CPUs that actually had netdevs allocated will be cleaned up, avoiding potential issues with CPU hotplug scenarios. | ||||
| CVE-2026-45899 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache when splitting extent fails When the split extent fails, we might leave some extents still being processed and return an error directly, which will result in stale extent entries remaining in the extent status tree. So drop all of the remaining potentially stale extents if the splitting fails. | ||||
| CVE-2026-45898 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK> | ||||
| CVE-2026-45897 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_counter: serialize reset with spinlock Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later. | ||||
| CVE-2026-45896 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: intel-dg: Fix accessing regions before setting nregions The regions array is counted by nregions, but it's set only after accessing it: [] UBSAN: array-index-out-of-bounds in drivers/mtd/devices/mtd_intel_dg.c:750:15 [] index 0 is out of range for type '<unknown> [*]' Fix it by also fixing an undesired behavior: the loop silently ignores ENOMEM and continues setting the other entries. | ||||
| CVE-2026-45895 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix livelock between quotactl and freeze_super When a filesystem is frozen, quotactl_block() enters a retry loop waiting for the filesystem to thaw. It acquires s_umount, checks the freeze state, drops s_umount and uses sb_start_write() - sb_end_write() pair to wait for the unfreeze. However, this retry loop can trigger a livelock issue, specifically on kernels with preemption disabled. The mechanism is as follows: 1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write(). 2. sb_wait_write() calls percpu_down_write(), which initiates synchronize_rcu(). 3. Simultaneously, quotactl_block() spins in its retry loop, immediately executing the sb_start_write() - sb_end_write() pair. 4. Because the kernel is non-preemptible and the loop contains no scheduling points, quotactl_block() never yields the CPU. This prevents that CPU from reaching an RCU quiescent state. 5. synchronize_rcu() in the freezer thread waits indefinitely for the quotactl_block() CPU to report a quiescent state. 6. quotactl_block() spins indefinitely waiting for the freezer to advance, which it cannot do as it is blocked on the RCU sync. This results in a hang of the freezer process and 100% CPU usage by the quota process. While this can occur intermittently on multi-core systems, it is reliably reproducing on a node with the following script, running both the freezer and the quota toggle on the same CPU: # mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount # mount /dev/sda -o quota,usrquota,grpquota a_mount # taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \ xfs_freeze -u a_mount; done" & # taskset -c 3 bash -c "while true; do quotaon a_mount; \ quotaoff a_mount; done" & Adding cond_resched() to the retry loop fixes the issue. It acts as an RCU quiescent state, allowing synchronize_rcu() in percpu_down_write() to complete. | ||||
| CVE-2026-45894 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down PASID entry The Intel VT-d Scalable Mode PASID table entry consists of 512 bits (64 bytes). When tearing down an entry, the current implementation zeros the entire 64-byte structure immediately using multiple 64-bit writes. Since the IOMMU hardware may fetch these 64 bytes using multiple internal transactions (e.g., four 128-bit bursts), updating or zeroing the entire entry while it is active (P=1) risks a "torn" read. If a hardware fetch occurs simultaneously with the CPU zeroing the entry, the hardware could observe an inconsistent state, leading to unpredictable behavior or spurious faults. Follow the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the PASID entry. 2. Use a dma_wmb() to ensure the cleared bit is visible to hardware before proceeding. 3. Execute the required invalidation sequence (PASID cache, IOTLB, and Device-TLB flush) to ensure the hardware has released all cached references. 4. Only after the flushes are complete, zero out the remaining fields of the PASID entry. Also, add a dma_wmb() in pasid_set_present() to ensure that all other fields of the PASID entry are visible to the hardware before the Present bit is set. | ||||