| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it. |
| Medtronic MyCareLink Patient Monitor has an internal serial interface, which allows an attacker with physical access to access a login prompt via a UART terminal. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq
The wacom_intuos_bt_irq() function processes Bluetooth HID reports
without sufficient bounds checking. A maliciously crafted short report
can trigger an out-of-bounds read when copying data into the wacom
structure.
Specifically, report 0x03 requires at least 22 bytes to safely read
the processed data and battery status, while report 0x04 (which
falls through to 0x03) requires 32 bytes.
Add explicit length checks for these report IDs and log a warning if
a short report is received. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: discard stale unicode buffer on alt screen exit after resize
When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and
sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize()
skips reallocating the unicode buffer because vc_uni_lines is NULL.
However, vc_saved_uni_lines still points to the old buffer allocated for
the original dimensions.
When leave_alt_screen() later restores vc_saved_uni_lines, the buffer
dimensions no longer match vc_rows/vc_cols. Any operation that iterates
over the unicode buffer using the current dimensions (e.g. csi_J clearing
the screen) will access memory out of bounds, causing a kernel oops:
BUG: unable to handle page fault for address: 0x0000002000000020
RIP: 0010:csi_J+0x133/0x2d0
The faulting address 0x0000002000000020 is two adjacent u32 space
characters (0x20) interpreted as a pointer, read from the row data area
past the end of the 25-entry pointer array in a buffer allocated for
80x25 but accessed with 240x67 dimensions.
Fix this by checking whether the console dimensions changed while in the
alternate screen. If they did, free the stale saved buffer instead of
restoring it. The unicode screen will be lazily rebuilt via
vc_uniscr_check() when next needed. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: tdx-guest: Fix handling of host controlled 'quote' buffer length
Validate host controlled value `quote_buf->out_len` that determines how
many bytes of the quote are copied out to guest userspace. In TDX
environments with remote attestation, quotes are not considered private,
and can be forwarded to an attestation server.
Catch scenarios where the host specifies a response length larger than
the guest's allocation, or otherwise races modifying the response while
the guest consumes it.
This prevents contents beyond the pages allocated for `quote_buf`
(up to TSM_REPORT_OUTBLOB_MAX) from being read out to guest userspace,
and possibly forwarded in attestation requests.
Recall that some deployments want per-container configs-tsm-report
interfaces, so the leak may cross container protection boundaries, not
just local root. |
| Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage volume import logic allows an authenticated user with access to the storage volume feature to cause the Incus daemon to crash. The backup restore subsystem contains an out-of-bounds panic vulnerability caused by an invalid bounds check when indexing snapshot metadata arrays, and the same flawed pattern also appears in the migration path. When iterating through physical snapshots provided in a backup archive, the loop uses the index to look up corresponding metadata in the parsed `Config.Snapshots` and `Config.VolumeSnapshots` slices. The guard condition `len(slice) >= i-1` is incorrect because it can still evaluate to true when the subsequent slice[i] access is out of bounds.
An attacker can submit a backup archive that contains physical snapshot directories while supplying a tampered `index.yaml` with an empty or truncated snapshot metadata array, causing the daemon to index beyond the end of the metadata slice and crash. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0. |
| HCL BigFix Service Management (SM) application fails to strip EXIF metadata from uploaded images. This could lead to confidentiality and privacy risks if sensitive location information is unintentionally shared. . |
| Memory safety bugs present in Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150 and Thunderbird 150. |
| A stack-based buffer overflow in the tmpServer module of TP-Link Archer AX53 v1.0 allows an authenticated adjacent attacker to trigger a segmentation fault and potentially execute arbitrary code via a specially crafted configuration file. Successful exploitation may cause a crash and could allow arbitrary code execution, enabling modification of device state, exposure of sensitive data, or further compromise of device integrity.
This issue affects AX53 v1.0: before 1.7.1 Build 20260213. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: validate connector number in ucsi_notify_common()
The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a
7-bit field (0-127) that is used to index into the connector array in
ucsi_connector_change(). However, the array is only allocated for the
number of connectors reported by the device (typically 2-4 entries).
A malicious or malfunctioning device could report an out-of-range
connector number in the CCI, causing an out-of-bounds array access in
ucsi_connector_change().
Add a bounds check in ucsi_notify_common(), the central point where CCI
is parsed after arriving from hardware, so that bogus connector numbers
are rejected before they propagate further. |
| Out of bounds read in Codecs in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to obtain potentially sensitive information from process memory via a malicious file. (Chromium security severity: Medium) |
| Insufficient validation of untrusted input in ChromeDriver in Google Chrome on Windows prior to 148.0.7778.96 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in TabGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to perform UI spoofing via malicious network traffic. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in Cast in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to perform privilege escalation via a crafted HTML page. (Chromium security severity: Low) |
| Insufficient validation of untrusted input in SiteIsolation in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| A type confusion vulnerability in Qt SVG allows an attacker to cause an application crash via a crafted SVG image.
When processing SVG marker references, the renderer retrieves a node by its id attribute and casts it to QSvgMarker* without verifying the node type. A non-marker element (such as a <line> element) that references itself as a marker triggers an out-of-bounds heap read due to the object size difference between QSvgLine and QSvgMarker,
followed by an endless recursion that bypasses the marker recursion
guard through incorrect virtual dispatch. The result is an application
crash (denial of service).
This issue affects Qt SVG:
from 6.7.0 before 6.8.8, from 6.9.0 before 6.11.1. |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 148.0.7778.96 allowed an attacker who convinced a user to install a malicious extension to leak cross-origin data via a crafted Chrome Extension. (Chromium security severity: Low) |
| RedisTimeSeries is a time-series module for Redis. In all versions before 1.12.14 of RedisTimeSeries, the module does not properly validate serialized values processed through the Redis RESTORE command. An authenticated attacker with permission to execute RESTORE on a server with the RedisTimeSeries module loaded can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This has been patched in version 1.12.14. |
| RedisBloom is a probabilistic data structures module for Redis. In all versions of RedisBloom before 2.8.20, the module does not properly validate serialized values processed through the Redis RESTORE command. An authenticated attacker with permission to execute RESTORE on a server with the RedisBloom module loaded can supply a crafted serialized payload that triggers invalid memory access and may lead to remote code execution. A workaround is to restrict access to the RESTORE command with ACL rules. This issue is fixed in version 2.8.20. |
| ModSecurity is an open source, cross platform web application firewall (WAF) engine for Apache, IIS and Nginx. Libmodsecurity is one component of the ModSecurity v3 project. A segmentation fault occurs when a rule using the t:hexDecode transformation inspects a query string parameter containing a single character. An attacker can exploit this to crash worker processes, causing a denial of service. Service resumes once the attack stops as worker processes recover from the segfault. All versions before 3.0.15 of libModSecurity3 are affected. This has been patched in version 3.0.15. |
