| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
Such issue can be observed with the
test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of
3600 and shrinking by 256 bytes (an upcoming selftest patch): the last
fragment gets released by the XDP code but doesn't get tracked by the
driver. This results in a negative pp_ref_count during page release and
the following splat:
WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137
Modules linked in: [...]
CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core]
mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core]
mlx5e_close_rq+0x50/0x60 [mlx5_core]
mlx5e_close_queues+0x36/0x2c0 [mlx5_core]
mlx5e_close_channel+0x1c/0x50 [mlx5_core]
mlx5e_close_channels+0x45/0x80 [mlx5_core]
mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core]
mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core]
netif_set_mtu_ext+0xf1/0x230
do_setlink.isra.0+0x219/0x1180
rtnl_newlink+0x79f/0xb60
rtnetlink_rcv_msg+0x213/0x3a0
netlink_rcv_skb+0x48/0xf0
netlink_unicast+0x24a/0x350
netlink_sendmsg+0x1ee/0x410
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x232/0x280
___sys_sendmsg+0x78/0xb0
__sys_sendmsg+0x5f/0xb0
[...]
do_syscall_64+0x57/0xc50
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: image: mdc800: kill download URB on timeout
mdc800_device_read() submits download_urb and waits for completion.
If the timeout fires and the device has not responded, the function
returns without killing the URB, leaving it active.
A subsequent read() resubmits the same URB while it is still
in-flight, triggering the WARN in usb_submit_urb():
"URB submitted while active"
Check the return value of wait_event_timeout() and kill the URB if
it indicates timeout, ensuring the URB is complete before its status
is inspected or the URB is resubmitted.
Similar to
- commit 372c93131998 ("USB: yurex: fix control-URB timeout handling")
- commit b98d5000c505 ("media: rc: iguanair: handle timeouts") |
| In the Linux kernel, the following vulnerability has been resolved:
USB: core: Limit the length of unkillable synchronous timeouts
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts
The usbtmc driver accepts timeout values specified by the user in an
ioctl command, and uses these timeouts for some usb_bulk_msg() calls.
Since the user can specify arbitrarily long timeouts and
usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable()
instead to avoid the possibility of the user hanging a kernel thread
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: Fix for duplicate device in netdev hooks
When handling NETDEV_REGISTER notification, duplicate device
registration must be avoided since the device may have been added by
nft_netdev_hook_alloc() already when creating the hook. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: route: hold key->lock in mctp_flow_prepare_output()
mctp_flow_prepare_output() checks key->dev and may call
mctp_dev_set_key(), but it does not hold key->lock while doing so.
mctp_dev_set_key() and mctp_dev_release_key() are annotated with
__must_hold(&key->lock), so key->dev access is intended to be
serialized by key->lock. The mctp_sendmsg() transmit path reaches
mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()
without holding key->lock, so the check-and-set sequence is racy.
Example interleaving:
CPU0 CPU1
---- ----
mctp_flow_prepare_output(key, devA)
if (!key->dev) // sees NULL
mctp_flow_prepare_output(
key, devB)
if (!key->dev) // still NULL
mctp_dev_set_key(devB, key)
mctp_dev_hold(devB)
key->dev = devB
mctp_dev_set_key(devA, key)
mctp_dev_hold(devA)
key->dev = devA // overwrites devB
Now both devA and devB references were acquired, but only the final
key->dev value is tracked for release. One reference can be lost,
causing a resource leak as mctp_dev_release_key() would only decrease
the reference on one dev.
Fix by taking key->lock around the key->dev check and
mctp_dev_set_key() call. |
| A flaw has been found in Kilo-Org kilocode up to 7.0.47. This issue affects the function Load of the file packages/opencode/src/config/config.ts of the component Environment Variable Handler. Executing a manipulation of the argument KILO_CONFIG_CONTENT can lead to information disclosure. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: account for netlink header size
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: use expect->helper
Use expect->helper in ctnetlink and /proc to dump the helper name.
Using nfct_help() without holding a reference to the master conntrack
is unsafe.
Use exp->master->helper in ctnetlink path if userspace does not provide
an explicit helper when creating an expectation to retain the existing
behaviour. The ctnetlink expectation path holds the reference on the
master conntrack and nf_conntrack_expect lock and the nfnetlink glue
path refers to the master ct that is attached to the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix work re-schedule after cancel in xfrm_nat_keepalive_net_fini()
After cancel_delayed_work_sync() is called from
xfrm_nat_keepalive_net_fini(), xfrm_state_fini() flushes remaining
states via __xfrm_state_delete(), which calls
xfrm_nat_keepalive_state_updated() to re-schedule nat_keepalive_work.
The following is a simple race scenario:
cpu0 cpu1
cleanup_net() [Round 1]
ops_undo_list()
xfrm_net_exit()
xfrm_nat_keepalive_net_fini()
cancel_delayed_work_sync(nat_keepalive_work);
xfrm_state_fini()
xfrm_state_flush()
xfrm_state_delete(x)
__xfrm_state_delete(x)
xfrm_nat_keepalive_state_updated(x)
schedule_delayed_work(nat_keepalive_work);
rcu_barrier();
net_complete_free();
net_passive_dec(net);
llist_add(&net->defer_free_list, &defer_free_list);
cleanup_net() [Round 2]
rcu_barrier();
net_complete_free()
kmem_cache_free(net_cachep, net);
nat_keepalive_work()
// on freed net
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: unset conn->binding on failed binding request
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: log new dentries when logging parent dir of a conflicting inode
If we log the parent directory of a conflicting inode, we are not logging
the new dentries of the directory, so when we finish we have the parent
directory's inode marked as logged but we did not log its new dentries.
As a consequence if the parent directory is explicitly fsynced later and
it does not have any new changes since we logged it, the fsync is a no-op
and after a power failure the new dentries are missing.
Example scenario:
$ mkdir foo
$ sync
$rmdir foo
$ mkdir dir1
$ mkdir dir2
# A file with the same name and parent as the directory we just deleted
# and was persisted in a past transaction. So the deleted directory's
# inode is a conflicting inode of this new file's inode.
$ touch foo
$ ln foo dir2/link
# The fsync on dir2 will log the parent directory (".") because the
# conflicting inode (deleted directory) does not exists anymore, but it
# it does not log its new dentries (dir1).
$ xfs_io -c "fsync" dir2
# This fsync on the parent directory is no-op, since the previous fsync
# logged it (but without logging its new dentries).
$ xfs_io -c "fsync" .
<power failure>
# After log replay dir1 is missing.
Fix this by ensuring we log new dir dentries whenever we log the parent
directory of a no longer existing conflicting inode.
A test case for fstests will follow soon. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Open-code GGTT MMIO access protection
GGTT MMIO access is currently protected by hotplug (drm_dev_enter),
which works correctly when the driver loads successfully and is later
unbound or unloaded. However, if driver load fails, this protection is
insufficient because drm_dev_unplug() is never called.
Additionally, devm release functions cannot guarantee that all BOs with
GGTT mappings are destroyed before the GGTT MMIO region is removed, as
some BOs may be freed asynchronously by worker threads.
To address this, introduce an open-coded flag, protected by the GGTT
lock, that guards GGTT MMIO access. The flag is cleared during the
dev_fini_ggtt devm release function to ensure MMIO access is disabled
once teardown begins.
(cherry picked from commit 4f3a998a173b4325c2efd90bdadc6ccd3ad9a431) |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Hold net reference for the lifetime of /proc/fs/nfs/exports fd
The /proc/fs/nfs/exports proc entry is created at module init
and persists for the module's lifetime. exports_proc_open()
captures the caller's current network namespace and stores
its svc_export_cache in seq->private, but takes no reference
on the namespace. If the namespace is subsequently torn down
(e.g. container destruction after the opener does setns() to a
different namespace), nfsd_net_exit() calls nfsd_export_shutdown()
which frees the cache. Subsequent reads on the still-open fd
dereference the freed cache_detail, walking a freed hash table.
Hold a reference on the struct net for the lifetime of the open
file descriptor. This prevents nfsd_net_exit() from running --
and thus prevents nfsd_export_shutdown() from freeing the cache
-- while any exports fd is open. cache_detail already stores
its net pointer (cd->net, set by cache_create_net()), so
exports_release() can retrieve it without additional per-file
storage. |
| Incorrect Use of Privileged APIs vulnerability in Utarit Information Technologies SoliPay Mobile App allows Collect Data as Provided by Users.
This issue affects SoliPay Mobile App: before 5.0.8. |
| The mono package before 6.8.0.105+dfsg-3.3 for Debian allows arbitrary code execution because the application/x-ms-dos-executable MIME type is associated with an un-sandboxed Mono CLR interpreter. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Wait for RCU readers during policy netns exit
xfrm_policy_fini() frees the policy_bydst hash tables after flushing the
policy work items and deleting all policies, but it does not wait for
concurrent RCU readers to leave their read-side critical sections first.
The policy_bydst tables are published via rcu_assign_pointer() and are
looked up through rcu_dereference_check(), so netns teardown must also
wait for an RCU grace period before freeing the table memory.
Fix this by adding synchronize_rcu() before freeing the policy hash tables. |
| A security issue was discovered in ingress-nginx where a combination of Ingress annotations can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap init error handling
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret. |
