| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid mapping wrong physical block for swapfile
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile. |
| ZOC Terminal 7.23.4 contains a buffer overflow vulnerability in the Shell field of Program Settings that allows local attackers to crash the application by supplying an excessively long string. Attackers can paste a crafted payload into the Shell configuration field and trigger a crash when accessing the Command Shell feature. |
| Stack Buffer Overflow in wc_HpkeLabeledExtract via Oversized ECH Config. A vulnerability existed in wolfSSL 5.8.4 ECH (Encrypted Client Hello) support, where a maliciously crafted ECH config could cause a stack buffer overflow on the client side, leading to potential remote execution and client program crash. This could be exploited by a malicious TLS server supporting ECH. Note that ECH is off by default, and is only enabled with enable-ech. |
| GPAC is an open-source multimedia framework. Prior to commit 86b0e36, a heap-based buffer overflow (write) vulnerability was discovered in GPAC MP4Box. The vulnerability exists in the gf_xml_parse_bit_sequence_bs function in utils/xml_bin_custom.c when processing a crafted NHML file containing malicious <BS> (BitSequence) elements. An attacker can exploit this by providing a specially crafted NHML file, causing an out-of-bounds write on the heap. This issue has been via commit 86b0e36. |
| An attacker might be able to trigger an out-of-bounds write by sending crafted DNS responses to a DNSdist using the DNSQuestion:changeName or DNSResponse:changeName methods in custom Lua code. In some cases the rewritten packet might become larger than the initial response and even exceed 65535 bytes, potentially leading to a crash resulting in denial of service. |
| Out-of-bounds write in the query processing components in Amazon Athena ODBC driver before 2.1.0.0 might allow a threat actor to crash the driver by using specially crafted data that is processed by the driver during query operations.
To remediate this issue, users should upgrade to version 2.1.0.0. |
| NetSchedScan 1.0 contains a buffer overflow vulnerability in the scan Hostname/IP field that allows local attackers to crash the application by supplying an oversized input string. Attackers can paste a crafted payload containing 388 bytes of data followed by 4 bytes of EIP overwrite into the Hostname/IP field to trigger a denial of service condition. |
| GIMP JP2 File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of JP2 files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28863. |
| GIMP PSP File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PSP files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28874. |
| Faleemi Desktop Software 1.8 contains a local buffer overflow vulnerability in the System Setup dialog that allows attackers to bypass DEP protections through structured exception handling exploitation. Attackers can inject a crafted payload into the Save Path for Snapshot and Record file field to trigger a buffer overflow and execute arbitrary code via ROP chain gadgets. |
| R 3.4.4 contains a local buffer overflow vulnerability that allows attackers to execute arbitrary code by injecting malicious input into the GUI Preferences language field. Attackers can craft a payload with a 292-byte offset and JMP ESP instruction to execute commands like calc.exe when the payload is pasted into the Language for menus and messages field. |
| Easy MP3 Downloader 4.7.8.8 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an excessively long unlock code. Attackers can generate a file containing 6000 'A' characters and paste the contents into the Unlock Code field during application startup to trigger a denial of service condition. |
| Folder Lock 7.7.9 contains a buffer overflow vulnerability in the serial number registration field that allows local attackers to crash the application by submitting an oversized payload. Attackers can paste a 6000-byte buffer of arbitrary data into the 'Serial Number and Registration Key' field to trigger a denial of service condition. |
| Verypdf docPrint Pro 8.0 contains a structured exception handling buffer overflow vulnerability that allows local attackers to execute arbitrary code by supplying an oversized alphanumeric encoded payload in the User Password or Master Password fields. Attackers can craft a malicious payload with encoded shellcode and SEH chain manipulation to bypass protections and execute a MessageBox proof-of-concept when the password fields are processed during PDF encryption. |
| WinMPG iPod Convert 3.0 contains a buffer overflow vulnerability in the Register dialog that allows local attackers to crash the application by supplying an oversized payload. Attackers can paste a large string of characters into the User Name and User Code field to trigger a denial of service condition. |
| GetGo Download Manager 6.2.2.3300 contains a buffer overflow vulnerability that allows remote attackers to cause denial of service by sending HTTP responses with excessively long headers. Attackers can craft malicious HTTP responses with oversized header values to crash the application and make it unavailable. |
| R 3.4.4 on Windows x64 contains a buffer overflow vulnerability in the GUI Preferences language menu field that allows local attackers to bypass DEP and ASLR protections. Attackers can inject a crafted payload through the Language for menus preference to trigger a structured exception handler chain pivot and execute arbitrary shellcode with application privileges. |
| RAR Password Recovery 1.80 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an oversized payload in the registration dialog. Attackers can craft a malicious input string exceeding 6000 bytes and paste it into the User Name and Registration Code field to trigger an application crash. |
| SQL Server Password Changer 1.90 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an oversized payload. Attackers can inject 6000 bytes of data into the User Name and Registration Code field to trigger a denial of service condition. |
| SpotIE Internet Explorer Password Recovery 2.9.5 contains a denial of service vulnerability in the registration key input field that allows local attackers to crash the application by supplying an excessively long string. Attackers can paste a 256-character payload into the Key field during registration to trigger a buffer overflow and crash the application. |
