| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer overflow vulnerability exists in the Palo Alto Networks GlobalProtect™ app that enables a man in the middle attacker to disrupt system processes and potentially execute arbitrary code with SYSTEM privileges. This vulnerability is triggered during the processing of requests and responses exchanged between Portal and Gateway.
The GlobalProtect app on iOS is not affected. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced plain identification for encoded extents
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain(). |
| When running in Appliance mode, an authenticated remote command injection vulnerability exists in an undisclosed iControl REST endpoint. A successful exploit can allow the attacker to cross a security boundary.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| simple-git enables running native Git commands from JavaScript. Versions up to and including 3.31.1 allow execution of arbitrary commands through Git option manipulation, bypassing safety checks meant to block dangerous options like -u and --upload-pack. The flaw stems from an incomplete fix for CVE-2022-25860, as Git's flexible option parsing allows numerous character combinations (e.g., -vu, -4u, -nu) to circumvent the regular-expression-based blocklist in the unsafe operations plugin. Due to the virtually infinite number of valid option variants that Git accepts, a complete blocklist-based mitigation may be infeasible without fully emulating Git's option parsing behavior. This issue has been fixed in version 3.32.0. |
| A command injection vulnerability in Palo Alto Networks PAN-OS software enables an authenticated administrator to bypass system restrictions and run arbitrary commands as root on the firewall. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Designer versions 15.1.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Media Encoder versions 26.0.2, 25.6.4 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects versions 26.0, 25.6.4 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| OpenTelemetry.OpAmp.Client is the OpAMP client for OpenTelemetry .NET. Prior to 0.2.0-alpha.1, when receiving responses from the OpAMP server over HTTP, the OpAMP client allocates an unbounded buffer to read all bytes from the server, with no upper-bound on the number of bytes consumed. This could cause memory exhaustion in the consuming application if the configured OpAMP server is attacker-controlled (or a network attacker can MitM the connection) and an extremely large body is returned in the response. This vulnerability is fixed in 0.2.0-alpha.1. |
| Multiple command injection vulnerabilities in Palo Alto Networks PAN-OS® software enable an authenticated administrator to bypass system restrictions and run arbitrary commands as a root user. To be able to exploit this issue, the user must have access to the PAN-OS CLI or Web UI.
The security risk posed by this issue is significantly minimized when CLI access is restricted to a limited group of administrators and by restricting access to the management web interface to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable to PAN-OS software on PA-Series and VM-Series firewalls and on Panorama (virtual and M-Series).
Cloud NGFW and Prisma Access® are not impacted by these vulnerabilities. |
| A potential vulnerability was reported in some Lenovo Personal Cloud Storage devices that could allow a remote authenticated user on the local network to execute arbitrary commands on the device. |
| Termix is a web-based server management platform with SSH terminal, tunneling, and file editing capabilities. Prior to version 2.1.0, all Docker container management endpoints in Termix interpolate the containerId URL path parameter and WebSocket message field directly into shell commands executed via ssh2.Client.exec() on remote managed servers without any sanitization or validation. An authenticated attacker can inject arbitrary OS commands by crafting a malicious container ID, achieving Remote Code Execution on any managed server. This issue has been patched in version 2.1.0. |
| A buffer overflow vulnerability in the IKEv2 processing of Palo Alto Networks PAN-OS® software allows an unauthenticated network-based attacker to execute arbitrary code with elevated privileges on the firewall, or cause a denial of service (DoS) condition.
Panorama, Cloud NGFW, and Prisma® Access are not impacted by these vulnerabilities. |
| An OS command injection vulnerability in the web management interface of certain ASUS router models allows remote authenticated administrators to execute arbitrary system commands via a crafted parameter.
Refer to the 'Security Update for ASUS Router Firmware' section on the ASUS Security Advisory for more information. |
| A vulnerability exists in the ngx_http_scgi_module and ngx_http_uwsgi_module modules that may result in excessive memory allocation or an over-read of data. When scgi_pass or uwsgi_pass is configured, an unauthenticated attacker with man-in-the-middle (MITM) ability to control responses from an upstream server may be able to read the memory of the NGINX worker process or restart it. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
