Export limit exceeded: 353540 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353540 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46050 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix deadlock with check operation and nowait requests When an array check is running it will raise the barrier at which point normal requests will become blocked and increment the nr_pending value to signal there is work pending inside of wait_barrier(). NOWAIT requests do not block and so will return immediately with an error, and additionally do not increment nr_pending in wait_barrier(). Upstream change commit 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit this condition. raid_end_bio_io() eventually calls allow_barrier() and it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even though the corresponding increment on nr_pending didn't happen in the NOWAIT case. This can be easily seen by starting a check operation while an application is doing nowait IO on the same array. This results in a deadlocked state due to nr_pending value underflowing and so the md resync thread gets stuck waiting for nr_pending to == 0. Output of r10conf state of the array when we hit this condition: crash> struct r10conf barrier = 1, nr_pending = { counter = -41 }, nr_waiting = 15, nr_queued = 0, Example of md_sync thread stuck waiting on raise_barrier() and other requests stuck in wait_barrier(): md1_resync [<0>] raise_barrier+0xce/0x1c0 [<0>] raid10_sync_request+0x1ca/0x1ed0 [<0>] md_do_sync+0x779/0x1110 [<0>] md_thread+0x90/0x160 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 kworker/u1040:2+flush-253:4 [<0>] wait_barrier+0x1de/0x220 [<0>] regular_request_wait+0x30/0x180 [<0>] raid10_make_request+0x261/0x1000 [<0>] md_handle_request+0x13b/0x230 [<0>] __submit_bio+0x107/0x1f0 [<0>] submit_bio_noacct_nocheck+0x16f/0x390 [<0>] ext4_io_submit+0x24/0x40 [<0>] ext4_do_writepages+0x254/0xc80 [<0>] ext4_writepages+0x84/0x120 [<0>] do_writepages+0x7a/0x260 [<0>] __writeback_single_inode+0x3d/0x300 [<0>] writeback_sb_inodes+0x1dd/0x470 [<0>] __writeback_inodes_wb+0x4c/0xe0 [<0>] wb_writeback+0x18b/0x2d0 [<0>] wb_workfn+0x2a1/0x400 [<0>] process_one_work+0x149/0x330 [<0>] worker_thread+0x2d2/0x410 [<0>] kthread+0xbe/0xf0 [<0>] ret_from_fork+0x34/0x50 [<0>] ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-46051 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: fix soft lockup in retry_aligned_read() When retry_aligned_read() encounters an overlapped stripe, it releases the stripe via raid5_release_stripe() which puts it on the lockless released_stripes llist. In the next raid5d loop iteration, release_stripe_list() drains the stripe onto handle_list (since STRIPE_HANDLE is set by the original IO), but retry_aligned_read() runs before handle_active_stripes() and removes the stripe from handle_list via find_get_stripe() -> list_del_init(). This prevents handle_stripe() from ever processing the stripe to resolve the overlap, causing an infinite loop and soft lockup. Fix this by using __release_stripe() with temp_inactive_list instead of raid5_release_stripe() in the failure path, so the stripe does not go through the released_stripes llist. This allows raid5d to break out of its loop, and the overlap will be resolved when the stripe is eventually processed by handle_stripe(). | ||||
| CVE-2026-46055 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix string overrun due to missing termination When booting Ubuntu 26.04 with Linux 7.0-rc4 on an ARM64 Qualcomm Snapdragon X1 we see a string buffer overrun: BUG: KASAN: slab-out-of-bounds in aa_dfa_match (security/apparmor/match.c:535) Read of size 1 at addr ffff0008901cc000 by task snap-update-ns/2120 CPU: 5 UID: 60578 PID: 2120 Comm: snap-update-ns Not tainted 7.0.0-rc4+ #22 PREEMPTLAZY Hardware name: LENOVO 83ED/LNVNB161216, BIOS NHCN60WW 09/11/2025 Call trace: show_stack (arch/arm64/kernel/stacktrace.c:501) (C) dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:597) __asan_report_load1_noabort (mm/kasan/report_generic.c:378) aa_dfa_match (security/apparmor/match.c:535) match_mnt_path_str (security/apparmor/mount.c:244 security/apparmor/mount.c:336) match_mnt (security/apparmor/mount.c:371) aa_bind_mount (security/apparmor/mount.c:447 (discriminator 4)) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) Allocated by task 2120: kasan_save_stack (mm/kasan/common.c:58) kasan_save_track (./arch/arm64/include/asm/current.h:19 mm/kasan/common.c:70 mm/kasan/common.c:79) kasan_save_alloc_info (mm/kasan/generic.c:571) __kasan_kmalloc (mm/kasan/common.c:419) __kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5260 mm/slub.c:5272) aa_get_buffer (security/apparmor/lsm.c:2201) aa_bind_mount (security/apparmor/mount.c:442) apparmor_sb_mount (security/apparmor/lsm.c:719 (discriminator 1)) security_sb_mount (security/security.c:1062 (discriminator 31)) path_mount (fs/namespace.c:4101) __arm64_sys_mount (fs/namespace.c:4172 fs/namespace.c:4361 fs/namespace.c:4338 fs/namespace.c:4338) invoke_syscall.constprop.0 (arch/arm64/kernel/syscall.c:35 arch/arm64/kernel/syscall.c:49) el0_svc_common.constprop.0 (./include/linux/thread_info.h:142 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) do_el0_svc (arch/arm64/kernel/syscall.c:152) el0_svc (arch/arm64/kernel/entry-common.c:80 arch/arm64/kernel/entry-common.c:725) el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:744) el0t_64_sync (arch/arm64/kernel/entry.S:596) The buggy address belongs to the object at ffff0008901ca000 which belongs to the cache kmalloc-rnd-06-8k of size 8192 The buggy address is located 0 bytes to the right of allocated 8192-byte region [ffff0008901ca000, ffff0008901cc000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9101c8 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:-1 pincount:0 flags: 0x8000000000000040(head|zone=2) page_type: f5(slab) raw: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 raw: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000040 ffff000800016c40 fffffdffe2d14e10 ffff000800015c70 head: 0000000000000000 0000000800010001 00000000f5000000 0000000000000000 head: 8000000000000003 fffffdffe2407201 fffffdffffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0008901cbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008 ---truncated--- | ||||
| CVE-2026-46056 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path. | ||||
| CVE-2026-4802 | 1 Redhat | 4 Enterprise Linux, Enterprise Linux Eus, Rhel E4s and 1 more | 2026-05-27 | 8 High |
| A flaw was found in Cockpit. This vulnerability allows a remote attacker to achieve arbitrary command execution on the host by exploiting unsanitized user-controlled parameters within crafted links in the system logs user interface (UI). An attacker can inject shell metacharacters and command substitutions into these parameters, leading to the execution of arbitrary shell commands on the affected system. This could result in a complete system compromise. | ||||
| CVE-2026-46025 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damon_call() vs kdamond_fn() exit race Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit race". damon_call() and damos_walk() can leak memory and/or deadlock when they race with kdamond terminations. Fix those. This patch (of 2); When kdamond_fn() main loop is finished, the function cancels all remaining damon_call() requests and unset the damon_ctx->kdamond so that API callers and API functions themselves can know the context is terminated. damon_call() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damon_call() starts waiting for the kdamond's handling of the newly added request. The damon_call() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damon_call() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damon_call() requests cancelling. Right after that, damon_call() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damon_call() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damon_call() caller threads infinitely waits. Fix this by introducing another damon_ctx field, namely call_controls_obsolete. It is protected by the damon_ctx->call_controls_lock, which protects damon_call() requests registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of remaining damon_call() requests is executed. damon_call() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. Note that the deadlock will not happen when damon_call() is called for repeat mode request. In tis case, damon_call() returns instead of waiting for the handling when the request registration succeeds and it shows the kdamond is running. However, if the request also has dealloc_on_cancel, the request memory would be leaked. The issue is found by sashiko [1]. | ||||
| CVE-2026-46028 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - snapshot IV for async AEAD requests AF_ALG AEAD AIO requests currently use the socket-wide IV buffer during request processing. For async requests, later socket activity can update that shared state before the original request has fully completed, which can lead to inconsistent IV handling. Snapshot the IV into per-request storage when preparing the AEAD request, so in-flight operations no longer depend on mutable socket state. | ||||
| CVE-2026-46042 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom <donettom@linux.ibm.com> | ||||
| CVE-2026-48687 | 1 Pavel-odintsov | 1 Fastnetmon | 2026-05-27 | 8.1 High |
| FastNetMon Community Edition through 1.2.9 contains an OS command injection vulnerability in the Juniper router integration plugin. The _log() function in src/juniper_plugin/fastnetmon_juniper.php (lines 117-118) constructs shell commands by concatenating the $msg parameter directly into exec() calls: exec("echo `date` \"- {FASTNETMON] - " . $msg . " \" >> " . $FILE_LOG_TMP). The $msg variable contains unsanitized data derived from command-line arguments argv[1] through argv[3], which represent the attack IP address, direction, and power. While FastNetMon's C++ core currently passes IP addresses via inet_ntoa() (which only produces safe dotted-decimal notation), the PHP script performs no input validation or shell escaping. If the script is invoked directly, by another orchestration system, or if future code changes pass string-sourced IPs, arbitrary commands can be injected. The correct fix is to replace exec() with file_put_contents() or use escapeshellarg() on all parameters. | ||||
| CVE-2026-45958 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it. | ||||
| CVE-2026-45971 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Limit bpf program signature size Practical BPF signatures are significantly smaller than KMALLOC_MAX_CACHE_SIZE Allowing larger sizes opens the door for abuse by passing excessive size values and forcing the kernel into expensive allocation paths (via kmalloc_large or vmalloc). | ||||
| CVE-2026-45976 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix memory leak in amdgpu_ras_init() When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function returns directly without freeing the allocated con structure, leading to a memory leak. Fix this by jumping to the release_con label to properly clean up the allocated memory before returning the error code. Compile tested only. Issue found using a prototype static analysis tool and code review. | ||||
| CVE-2026-45978 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: staging: greybus: lights: avoid NULL deref gb_lights_light_config() stores channel_count before allocating the channels array. If kcalloc() fails, gb_lights_release() iterates the non-zero count and dereferences light->channels, which is NULL. Allocate channels first and only then publish channels_count so the cleanup path can't walk a NULL pointer. | ||||
| CVE-2026-46035 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that unconditionally succeeds even when the lock is already held. As a result, alloc_frozen_pages_nolock() called from NMI context can re-enter rmqueue() and acquire the zone lock that the interrupted context is already holding, corrupting the freelists. With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with the slub_kunit test module: BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243 [...] Call Trace: <NMI> dump_stack_lvl+0x3f/0x60 do_raw_spin_trylock+0x41/0x50 _raw_spin_trylock+0x24/0x50 rmqueue.isra.0+0x2a9/0xa70 get_page_from_freelist+0xeb/0x450 alloc_frozen_pages_nolock_noprof+0x111/0x1e0 allocate_slab+0x42a/0x500 ___slab_alloc+0xa7/0x4c0 kmalloc_nolock_noprof+0x164/0x310 [...] </NMI> Fix this by returning NULL early when invoked from NMI on a UP kernel. | ||||
| CVE-2026-46036 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect. | ||||
| CVE-2026-46039 | 1 Linux | 1 Linux Kernel | 2026-05-27 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rxgk: Fix potential integer overflow in length check Fix potential integer overflow in rxgk_extract_token() when checking the length of the ticket. Rather than rounding up the value to be tested (which might overflow), round down the size of the available data. | ||||
| CVE-2026-8398 | 1 Disc-soft | 1 Daemon Tools | 2026-05-27 | 9.8 Critical |
| A supply chain attack compromised the official installation packages of DAEMON Tools Lite (Windows versions 12.5.0.2421 through 12.5.0.2434), distributed from the legitimate website daemon-tools.cc between approximately April 8, 2026, and May 5, 2026. Attackers gained unauthorized access to the vendor's (AVB Disc Soft) build or distribution infrastructure and trojanized three binaries: DTHelper.exe, DiscSoftBusServiceLite.exe, and DTShellHlp.exe. These files were digitally signed with the legitimate AVB Disc Soft code-signing certificate, allowing the malicious installers to appear trustworthy and bypass signature-based detection. | ||||
| CVE-2025-70103 | 2026-05-27 | 7.3 High | ||
| Heap buffer overflow vulnerability in libjxl 0.12.0 via crafted PBM images to the jxl::extras::DecodeImagePNM function in file lib/extras/dec/pnm.cc. | ||||
| CVE-2026-30498 | 2026-05-27 | 6.3 Medium | ||
| A Cross-Site Request Forgery (CSRF) vulnerability was discovered in the delete.php endpoint of Jason2605 AdminPanel 4.0. | ||||
| CVE-2026-45847 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE when accessing forward path array Although unlikely, recent support for IPIP tunnels increases chances of reaching this WARN_ON_ONCE if userspace manages to build a sufficiently long forward path. Remove it. | ||||