Export limit exceeded: 353497 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (353497 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-46088 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names() snd_ctl_elem_init_enum_names() advances pointer p through the names buffer while decrementing buf_len. If buf_len reaches zero but items remain, the next iteration calls strnlen(p, 0). While strnlen(p, 0) returns 0 and would hit the existing name_len == 0 error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks maxlen against __builtin_dynamic_object_size(). When Clang loses track of p's object size inside the loop, this triggers a BRK exception panic before the return value is examined. Add a buf_len == 0 guard at the loop entry to prevent calling fortified strnlen() on an exhausted buffer. Found by kernel fuzz testing through Xiaomi Smartphone. | ||||
| CVE-2026-46085 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted). | ||||
| CVE-2026-46084 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function. | ||||
| CVE-2026-46082 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@] | ||||
| CVE-2026-46080 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions. | ||||
| CVE-2026-46079 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rbd: fix null-ptr-deref when device_add_disk() fails do_rbd_add() publishes the device with device_add() before calling device_add_disk(). If device_add_disk() fails after device_add() succeeds, the error path calls rbd_free_disk() directly and then later falls through to rbd_dev_device_release(), which calls rbd_free_disk() again. This double teardown can leave blk-mq cleanup operating on invalid state and trigger a null-ptr-deref in __blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set(). Fix this by following the normal remove ordering: call device_del() before rbd_dev_device_release() when device_add_disk() fails after device_add(). That keeps the teardown sequence consistent and avoids re-entering disk cleanup through the wrong path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer confines failslab injections to the __add_disk() range and injects fail-nth while mapping an RBD image through /sys/bus/rbd/add_single_major. On the unpatched kernel, fail-nth=4 reliably triggered the fault: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240 Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00 RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246 RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4 RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004 FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0 PKRU: 55555554 Call Trace: <TASK> blk_mq_free_tag_set+0x77/0x460 do_rbd_add+0x1446/0x2b80 ? __pfx_do_rbd_add+0x10/0x10 ? lock_acquire+0x18c/0x300 ? find_held_lock+0x2b/0x80 ? sysfs_file_kobj+0xb6/0x1b0 ? __pfx_sysfs_kf_write+0x10/0x10 kernfs_fop_write_iter+0x2f4/0x4a0 vfs_write+0x98e/0x1000 ? expand_files+0x51f/0x850 ? __pfx_vfs_write+0x10/0x10 ksys_write+0xf2/0x1d0 ? __pfx_ksys_write+0x10/0x10 do_syscall_64+0x115/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0fbea15907 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907 RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001 RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141 R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058 R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004 </TASK> With this fix applied, rerunning the reproducer over fail-nth=1..256 yields no KASAN reports. [ idryomov: rename err_out_device_del -> err_out_device ] | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-46075 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak. | ||||
| CVE-2026-46074 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: ch341: fix memory leaks on probe failures Make sure to deregister the controller, disable pins, and kill and free the RX URB on probe failures to mirror disconnect and avoid memory leaks and use-after-free. Also add an explicit URB kill on disconnect for symmetry (even if that is not strictly required as USB core would have stopped it in the current setup). | ||||
| CVE-2026-46073 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when interrupted. This needs to abort the URB and return an error. No data has been received from the device so any reads from the transfer buffer are invalid. The original code tests !ret, which only catches the timeout case (0). On signal delivery (-ERESTARTSYS), !ret is false so the function skips usb_kill_urb() and falls through to read from the unfilled transfer buffer. Fix by capturing the return value into a long (matching the function return type) and handling signal (negative) and timeout (zero) cases with separate checks that both call usb_kill_urb() before returning. | ||||
| CVE-2026-46072 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: add buffer boundary checks to run_unpack() run_unpack() checks `run_buf < run_last` at the top of the while loop but then reads size_size and offset_size bytes via run_unpack_s64() without verifying they fit within the remaining buffer. A crafted NTFS image with truncated run data in an MFT attribute triggers an OOB heap read of up to 15 bytes when the filesystem is mounted. Add boundary checks before each run_unpack_s64() call to ensure the declared field size does not exceed the remaining buffer. Found by fuzzing with a source-patched harness (LibAFL + QEMU). | ||||
| CVE-2026-46071 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Avoid clearing VMCB_LBR in vmcb12 svm_copy_lbrs() always marks VMCB_LBR dirty in the destination VMCB. However, nested_svm_vmexit() uses it to copy LBRs to vmcb12, and clearing clean bits in vmcb12 is not architecturally defined. Move vmcb_mark_dirty() to callers and drop it for vmcb12. This also facilitates incoming refactoring that does not pass the entire VMCB to svm_copy_lbrs(). | ||||
| CVE-2026-46070 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing. | ||||
| CVE-2026-46068 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix bounce buffer leaks in nx842_crypto_{alloc,free}_ctx The bounce buffers are allocated with __get_free_pages() using BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error path and nx842_crypto_free_ctx() release the buffers with free_page(). Use free_pages() with the matching order instead. | ||||
| CVE-2026-46067 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_memcg_{used,free}_bp Users can set damos_quota_goal->nid with arbitrary value for node_memcg_{used,free}_bp. But DAMON core is using those for NODE-DATA() without a validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo mkdir /sys/fs/cgroup/foo $ sudo ./damo start --damos_action stat --damos_quota_interval 1s \ --damos_quota_goal node_memcg_used_bp 50% -1 /foo $ sudo dmseg [...] [ 524.181426] Unable to handle kernel paging request at virtual address 0000000000002c00 Fix this issue by adding the validation of the given node id. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | ||||
| CVE-2026-46066 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix num_ops off-by-one when crypto allocation fails move_dirty_folio_in_page_array() may fail if the file is encrypted, the dirty folio is not the first in the batch, and it fails to allocate a bounce buffer to hold the ciphertext. When that happens, ceph_process_folio_batch() simply redirties the folio and flushes the current batch -- it can retry that folio in a future batch. However, if this failed folio is not contiguous with the last folio that did make it into the batch, then ceph_process_folio_batch() has already incremented `ceph_wbc->num_ops`; because it doesn't follow through and add the discontiguous folio to the array, ceph_submit_write() -- which expects that `ceph_wbc->num_ops` accurately reflects the number of contiguous ranges (and therefore the required number of "write extent" ops) in the writeback -- will panic the kernel: BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops); This issue can be reproduced on affected kernels by writing to fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat pattern (total filesize should not matter) and gradually increasing the system's memory pressure until a bounce buffer allocation fails. Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct value when move_dirty_folio_in_page_array() fails, but the folio already started counting a new (i.e. still-empty) extent. The defect corrected by this patch has existed since 2022 (see first `Fixes:`), but another bug blocked multi-folio encrypted writeback until recently (see second `Fixes:`). The second commit made it into 6.18.16, 6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch therefore fixes a regression (panic) introduced by cac190c7674f. | ||||
| CVE-2026-46065 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: Disconnect deferred I/O from the lifetime of struct fb_info Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an instance as part of initializing deferred I/O and remove it only after the final mapping has been closed. If the fb_info and the contained deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info to invalidate the mapping. Any access will then result in a SIGBUS signal. Fixes a long-standing problem, where a device hot-unplug happens while user space still has an active mapping of the graphics memory. The hot- unplug frees the instance of struct fb_info. Accessing the memory will operate on undefined state. | ||||
| CVE-2026-46063 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/shstk: Prevent deadlock during shstk sigreturn During sigreturn the shadow stack signal frame is popped. The kernel does this by reading the shadow stack using normal read accesses. When it can't assume the memory is shadow stack, it takes extra steps to makes sure it is reading actual shadow stack memory and not other normal readable memory. It does this by holding the mmap read lock while doing the access and checking the flags of the VMA. Unfortunately that is not safe. If the read of the shadow stack sigframe hits a page fault, the fault handler will try to recursively grab another mmap read lock. This normally works ok, but if a writer on another CPU is also waiting, the second read lock could fail and cause a deadlock. Fix this by not holding mmap lock during the read access to userspace. Instead use mmap_lock_speculate_...() to watch for changes between dropping mmap lock and the userspace access. Retry if anything grabbed an mmap write lock in between and could have changed the VMA. These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP kernels. So drop support for the other configs under the assumption that the !SMP shadow stack user base does not exist. Currently there is a check that skips the lookup work when the SSP can be assumed to be on a shadow stack. While reorganizing the function, remove the optimization to make the tricky code flows more common, such that issues like this cannot escape detection for so long. | ||||
| CVE-2026-46062 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix integer overflow in run_unpack() volume boundary check The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw addition which can wrap around for large lcn and len values, bypassing the validation. Use check_add_overflow() as is already done for the adjacent prev_lcn + dlcn and vcn64 + len checks added by commit 3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()"). Found by fuzzing with a source-patched harness (LibAFL + QEMU). | ||||
| CVE-2026-46061 | 1 Linux | 1 Linux Kernel | 2026-05-27 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in. | ||||