Export limit exceeded: 35344 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35344 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43331 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functions would be too fragile, so disable KCOV instrumentation for the entire machine_kexec_64.c and physaddr.c. If coverage-guided fuzzing ever needs these components in the future, other approaches should be considered. The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported there. [ bp: Space out comment for better readability. ] | ||||
| CVE-2026-26062 | 1 Fleetdm | 1 Fleet | 2026-05-18 | 6.5 Medium |
| Fleet is open source device management software. Prior to version 4.81.0, Fleet contained a denial-of-service (DoS) issue in the gRPC Launcher `PublishLogs` endpoint. In affected versions, certain unexpected input values were not handled gracefully, which could cause the Fleet server process to terminate while processing an authenticated request from an enrolled Launcher host. An authenticated attacker with access to any enrolled Launcher node key could cause an immediate and complete denial of service by sending a single gRPC request to the `PublishLogs` endpoint. This vulnerability impacts availability only. There is no exposure of sensitive data, no authentication bypass, no privilege escalation, and no integrity impact. Version 4.81.0 contains a patch. If upgrading immediately is not possible, the following mitigations can reduce exposure. Restrict network access to the Fleet gRPC endpoint where feasible (for example, limiting inbound access to known host IP ranges); deploy Fleet behind infrastructure that terminates or filters gRPC traffic if Launcher log ingestion is not required; and/or monitor for repeated Fleet process crashes or unexpected restarts indicating potential exploitation. | ||||
| CVE-2026-31635 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix oversized RESPONSE authenticator length check rxgk_verify_response() decodes auth_len from the packet and is supposed to verify that it fits in the remaining bytes. The existing check is inverted, so oversized RESPONSE authenticators are accepted and passed to rxgk_decrypt_skb(), which can later reach skb_to_sgvec() with an impossible length and hit BUG_ON(len). Decoded from the original latest-net reproduction logs with scripts/decode_stacktrace.sh: RIP: __skb_to_sgvec() [net/core/skbuff.c:5285 (discriminator 1)] Call Trace: skb_to_sgvec() [net/core/skbuff.c:5305] rxgk_decrypt_skb() [net/rxrpc/rxgk_common.h:81] rxgk_verify_response() [net/rxrpc/rxgk.c:1268] rxrpc_process_connection() [net/rxrpc/conn_event.c:266 net/rxrpc/conn_event.c:364 net/rxrpc/conn_event.c:386] process_one_work() [kernel/workqueue.c:3281] worker_thread() [kernel/workqueue.c:3353 kernel/workqueue.c:3440] kthread() [kernel/kthread.c:436] ret_from_fork() [arch/x86/kernel/process.c:164] Reject authenticator lengths that exceed the remaining packet payload. | ||||
| CVE-2020-17103 | 1 Microsoft | 10 Windows 10, Windows 10 1809, Windows 10 1909 and 7 more | 2026-05-18 | 7 High |
| Windows Cloud Files Mini Filter Driver Elevation of Privilege Vulnerability | ||||
| CVE-2026-43329 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: strictly check for maximum number of actions The maximum number of flowtable hardware offload actions in IPv6 is: * ethernet mangling (4 payload actions, 2 for each ethernet address) * SNAT (4 payload actions) * DNAT (4 payload actions) * Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing) for QinQ. * Redirect (1 action) Which makes 17, while the maximum is 16. But act_ct supports for tunnels actions too. Note that payload action operates at 32-bit word level, so mangling an IPv6 address takes 4 payload actions. Update flow_action_entry_next() calls to check for the maximum number of supported actions. While at it, rise the maximum number of actions per flow from 16 to 24 so this works fine with IPv6 setups. | ||||
| CVE-2026-43332 | 1 Linux | 1 Linux Kernel | 2026-05-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: core: Fix thermal zone device registration error path If thermal_zone_device_register_with_trips() fails after registering a thermal zone device, it needs to wait for the tz->removal completion like thermal_zone_device_unregister(), in case user space has managed to take a reference to the thermal zone device's kobject, in which case thermal_release() may not be called by the error path itself and tz may be freed prematurely. Add the missing wait_for_completion() call to the thermal zone device registration error path. | ||||
| CVE-2021-45031 | 1 Mepsan | 1 Stawiz Usc\+\+ | 2026-05-18 | 7.7 High |
| A vulnerability in MEPSAN's USC+ before version 3.0 has a weakness in login function which lets attackers to generate high privileged accounts passwords. | ||||
| CVE-2026-43220 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: serialize sequence allocation under concurrent TLB invalidations With concurrent TLB invalidations, completion wait randomly gets timed out because cmd_sem_val was incremented outside the IOMMU spinlock, allowing CMD_COMPL_WAIT commands to be queued out of sequence and breaking the ordering assumption in wait_on_sem(). Move the cmd_sem_val increment under iommu->lock so completion sequence allocation is serialized with command queuing. And remove the unnecessary return. | ||||
| CVE-2026-43109 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86: shadow stacks: proper error handling for mmap lock 김영민 reports that shstk_pop_sigframe() doesn't check for errors from mmap_read_lock_killable(), which is a silly oversight, and also shows that we haven't marked those functions with "__must_check", which would have immediately caught it. So let's fix both issues. | ||||
| CVE-2026-31709 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate the whole DACL before rewriting it in cifsacl build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a server-supplied dacloffset and then use the incoming ACL to rebuild the chmod/chown security descriptor. The original fix only checked that the struct smb_acl header fits before reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate header-field OOB read, but the rewrite helpers still walk ACEs based on pdacl->num_aces with no structural validation of the incoming DACL body. A malicious server can return a truncated DACL that still contains a header, claims one or more ACEs, and then drive replace_sids_and_copy_aces() or set_chmod_dacl() past the validated extent while they compare or copy attacker-controlled ACEs. Factor the DACL structural checks into validate_dacl(), extend them to validate each ACE against the DACL bounds, and use the shared validator before the chmod/chown rebuild paths. parse_dacl() reuses the same validator so the read-side parser and write-side rewrite paths agree on what constitutes a well-formed incoming DACL. | ||||
| CVE-2025-21845 | 1 Linux | 1 Linux Kernel | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: sst: Fix SST write failure 'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`")' introduced a bug where only one byte of data is written, regardless of the number of bytes passed to sst_nor_write_data(), causing a kernel crash during the write operation. Ensure the correct number of bytes are written as passed to sst_nor_write_data(). Call trace: [ 57.400180] ------------[ cut here ]------------ [ 57.404842] While writing 2 byte written 1 bytes [ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74 [ 57.418464] Modules linked in: [ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30 [ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT) [ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.444557] pc : sst_nor_write_data+0x6c/0x74 [ 57.448911] lr : sst_nor_write_data+0x6c/0x74 [ 57.453264] sp : ffff80008232bb40 [ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001 [ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000 [ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000 [ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006 [ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580 [ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4 [ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530 [ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001 [ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000 [ 57.527916] Call trace: [ 57.530354] sst_nor_write_data+0x6c/0x74 [ 57.534361] sst_nor_write+0xb4/0x18c [ 57.538019] mtd_write_oob_std+0x7c/0x88 [ 57.541941] mtd_write_oob+0x70/0xbc [ 57.545511] mtd_write+0x68/0xa8 [ 57.548733] mtdchar_write+0x10c/0x290 [ 57.552477] vfs_write+0xb4/0x3a8 [ 57.555791] ksys_write+0x74/0x10c [ 57.559189] __arm64_sys_write+0x1c/0x28 [ 57.563109] invoke_syscall+0x54/0x11c [ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0 [ 57.571557] do_el0_svc+0x1c/0x28 [ 57.574868] el0_svc+0x30/0xcc [ 57.577921] el0t_64_sync_handler+0x120/0x12c [ 57.582276] el0t_64_sync+0x190/0x194 [ 57.585933] ---[ end trace 0000000000000000 ]--- [pratyush@kernel.org: add Cc stable tag] | ||||
| CVE-2024-56647 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-05-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Fix icmp host relookup triggering ip_rt_bug arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it. | ||||
| CVE-2026-43338 | 1 Linux | 1 Linux Kernel | 2026-05-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reserve enough transaction items for qgroup ioctls Currently our qgroup ioctls don't reserve any space, they just do a transaction join, which does not reserve any space, neither for the quota tree updates nor for the delayed refs generated when updating the quota tree. The quota root uses the global block reserve, which is fine most of the time since we don't expect a lot of updates to the quota root, or to be too close to -ENOSPC such that other critical metadata updates need to resort to the global reserve. However this is not optimal, as not reserving proper space may result in a transaction abort due to not reserving space for delayed refs and then abusing the use of the global block reserve. For example, the following reproducer (which is unlikely to model any real world use case, but just to illustrate the problem), triggers such a transaction abort due to -ENOSPC when running delayed refs: $ cat test.sh #!/bin/bash DEV=/dev/nullb0 MNT=/mnt/nullb0 umount $DEV &> /dev/null # Limit device to 1G so that it's much faster to reproduce the issue. mkfs.btrfs -f -b 1G $DEV mount -o commit=600 $DEV $MNT fallocate -l 800M $MNT/filler btrfs quota enable $MNT for ((i = 1; i <= 400000; i++)); do btrfs qgroup create 1/$i $MNT done umount $MNT When running this, we can see in dmesg/syslog that a transaction abort happened: [436.490] BTRFS error (device nullb0): failed to run delayed ref for logical 30408704 num_bytes 16384 type 176 action 1 ref_mod 1: -28 [436.493] ------------[ cut here ]------------ [436.494] BTRFS: Transaction aborted (error -28) [436.495] WARNING: fs/btrfs/extent-tree.c:2247 at btrfs_run_delayed_refs+0xd9/0x110 [btrfs], CPU#4: umount/2495372 [436.497] Modules linked in: btrfs loop (...) [436.508] CPU: 4 UID: 0 PID: 2495372 Comm: umount Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [436.510] Tainted: [W]=WARN [436.511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [436.513] RIP: 0010:btrfs_run_delayed_refs+0xdf/0x110 [btrfs] [436.514] Code: 0f 82 ea (...) [436.518] RSP: 0018:ffffd511850b7d78 EFLAGS: 00010292 [436.519] RAX: 00000000ffffffe4 RBX: ffff8f120dad37e0 RCX: 0000000002040001 [436.520] RDX: 0000000000000002 RSI: 00000000ffffffe4 RDI: ffffffffc090fd80 [436.522] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffc04d1867 [436.523] R10: ffff8f18dc1fffa8 R11: 0000000000000003 R12: ffff8f173aa89400 [436.524] R13: 0000000000000000 R14: ffff8f173aa89400 R15: 0000000000000000 [436.526] FS: 00007fe59045d840(0000) GS:ffff8f192e22e000(0000) knlGS:0000000000000000 [436.527] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [436.528] CR2: 00007fe5905ff2b0 CR3: 000000060710a002 CR4: 0000000000370ef0 [436.530] Call Trace: [436.530] <TASK> [436.530] btrfs_commit_transaction+0x73/0xc00 [btrfs] [436.531] ? btrfs_attach_transaction_barrier+0x1e/0x70 [btrfs] [436.532] sync_filesystem+0x7a/0x90 [436.533] generic_shutdown_super+0x28/0x180 [436.533] kill_anon_super+0x12/0x40 [436.534] btrfs_kill_super+0x12/0x20 [btrfs] [436.534] deactivate_locked_super+0x2f/0xb0 [436.534] cleanup_mnt+0xea/0x180 [436.535] task_work_run+0x58/0xa0 [436.535] exit_to_user_mode_loop+0xed/0x480 [436.536] ? __x64_sys_umount+0x68/0x80 [436.536] do_syscall_64+0x2a5/0xf20 [436.537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [436.537] RIP: 0033:0x7fe5906b6217 [436.538] Code: 0d 00 f7 (...) [436.540] RSP: 002b:00007ffcd87a61f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [436.541] RAX: 0000000000000000 RBX: 00005618b9ecadc8 RCX: 00007fe5906b6217 [436.541] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005618b9ecb100 [436.542] RBP: 0000000000000000 R08: 00007ffcd87a4fe0 R09: 00000000ffffffff [436.544] R10: 0000000000000103 R11: ---truncated--- | ||||
| CVE-2026-43336 | 1 Linux | 1 Linux Kernel | 2026-05-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it goes out of scope. | ||||
| CVE-2026-41101 | 1 Microsoft | 2 Word, Word For Android | 2026-05-16 | 7.1 High |
| Improper access control in Microsoft Office Word allows an authorized attacker to perform spoofing locally. | ||||
| CVE-2026-43334 | 1 Linux | 1 Linux Kernel | 2026-05-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned. | ||||
| CVE-2026-43316 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x] | ||||
| CVE-2026-43323 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix zero_vruntime tracking fix John reported that stress-ng-yield could make his machine unhappy and managed to bisect it to commit b3d99f43c72b ("sched/fair: Fix zero_vruntime tracking"). The combination of yield and that commit was specific enough to hypothesize the following scenario: Suppose we have 2 runnable tasks, both doing yield. Then one will be eligible and one will not be, because the average position must be in between these two entities. Therefore, the runnable task will be eligible, and be promoted a full slice (all the tasks do is yield after all). This causes it to jump over the other task and now the other task is eligible and current is no longer. So we schedule. Since we are runnable, there is no {de,en}queue. All we have is the __{en,de}queue_entity() from {put_prev,set_next}_task(). But per the fingered commit, those two no longer move zero_vruntime. All that moves zero_vruntime are tick and full {de,en}queue. This means, that if the two tasks playing leapfrog can reach the critical speed to reach the overflow point inside one tick's worth of time, we're up a creek. Additionally, when multiple cgroups are involved, there is no guarantee the tick will in fact hit every cgroup in a timely manner. Statistically speaking it will, but that same statistics does not rule out the possibility of one cgroup not getting a tick for a significant amount of time -- however unlikely. Therefore, just like with the yield() case, force an update at the end of every slice. This ensures the update is never more than a single slice behind and the whole thing is within 2 lag bounds as per the comment on entity_key(). | ||||
| CVE-2026-43311 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: pmc: Fix unsafe generic_handle_irq() call Currently, when resuming from system suspend on Tegra platforms, the following warning is observed: WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666 Call trace: handle_irq_desc+0x20/0x58 (P) tegra186_pmc_wake_syscore_resume+0xe4/0x15c syscore_resume+0x3c/0xb8 suspend_devices_and_enter+0x510/0x540 pm_suspend+0x16c/0x1d8 The warning occurs because generic_handle_irq() is being called from a non-interrupt context which is considered as unsafe. Fix this warning by deferring generic_handle_irq() call to an IRQ work which gets executed in hard IRQ context where generic_handle_irq() can be called safely. When PREEMPT_RT kernels are used, regular IRQ work (initialized with init_irq_work) is deferred to run in per-CPU kthreads in preemptible context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD variant so that with PREEMPT_RT kernels, the IRQ work is processed in hardirq context instead of being deferred to a thread which is required for calling generic_handle_irq(). On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD() execute in IRQ context, so this change has no functional impact for standard kernel configurations. [treding@nvidia.com: miscellaneous cleanups] | ||||
| CVE-2026-43350 | 1 Linux | 1 Linux Kernel | 2026-05-15 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: require a full NFS mode SID before reading mode bits parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS mode SID and reads sid.sub_auth[2] to recover the mode bits. That assumes the ACE carries three subauthorities, but compare_sids() only compares min(a, b) subauthorities. A malicious server can return an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still matches sid_unix_NFS_mode and then drives the sub_auth[2] read four bytes past the end of the ACE. Require num_subauth >= 3 before treating the ACE as an NFS mode SID. This keeps the fix local to the special-SID mode path without changing compare_sids() semantics for the rest of cifsacl. | ||||